Bobbing hammer

[mycar47562]

If i was to bob a hammer, could i have light fire issue's? I already have lighter springs in the gun im just wondering if the loss in hammer weight (inertia) would cause a problem

[rjrivero]

Typically, no. The spring is the usual suspect for light strikes.

[mycar47562]

Thank rj

[ISOM]

If the factory does the cutt-of the gun should be OK.
If you or a gunsmith does it there is a good chance
The spring is the usual suspect for light strikes or
The weight of the hammer is not heavy enough to
cause ignition.

[Dframe]

I'd like to point out the obvious here. If you bob the hammer AND have lightened springs you COULD be inviting a light strike. If you're going to lighten the hammer I would go back to full weight springs